VM /ETC

Posts Tagged ‘vcenter’

This post explains functionality of Veeam Backup and Replication (BaR) that you are not going to see in the User Guide. I was browsing the Veeam Forums and came across this thread – Backing up Veeam / vCentre Physical Machine which inspired me to write this post. The thread is actually about having an with an issue using with the scheduled backup of a physical vCenter server, which also happens to be running Veeam Backup and Replication, using another product.

I’ll get right to it. You can make a backup copy of physical SQL databases with Veeam BaR. Both vCenter and Veeam BaR have a SQL backend. You can’t schedule this as a job, but there are several scenarios where you could take advantage of a quick and easy, one time, manual backup  – before an upgrade or patch, for example.

Although I work for Veeam, this is not necessarily an intended or fully supported usage of the product. This is an easy alternative for the VMware admin to CYA , however.

I’ll start with a brief introduction on how the SQL U-AIR wizard is supposed to work, and then I will explain how you can use an admin switch to make a backup copy of SQL database whether on a VM or a physical server. VMware vCenter and Veeam BaR/Monitor/Reporter all have SQL back ends. 

The U-AIR Up There

To do this you can use the SQL U-AIR wizard. U-AIR stands for Universal Application Item Recovery, and there are 4 stand alone .exes for the various U-AIR wizards of Veeam BaR – AD, Exchange, SQL, and Universal. All of these wizards can be installed on the Veeam BaR server or on any Windows system that can communicate with Veeam. They could be installed on an admins desktop or the SQL, Exchange, or Domain Controller servers too.

Normally, the purpose of the U-AIR wizard is to request and kick off a workflow for a Veeam vPower Virtual Lab. Once the request is approved and managed by the VMware/Veeam administrator and the “Lab Manager–like” virtual lab is ready with the fenced off, running backup copy of the VM(s), the U-AIR wizards allow for the restore from the backup copy VM to the original production VM. For SQL VMs in particular, the restore options are shown in the following screen shot:

Watch this 4 minute video to see the normal SQL restore functionality of the wizard. This video skips the workflow request, skips the wait for approval and virtual lab start up, and just shows what is possible from a backup copy of a SQL VM. I also want to mention that this is an agentless solution. You do not need to install and manage agents anywhere with Veeam BaR.

Trick The System for Physical SQL backups

You can skip the workflow process of starting and using the vPower Virtual Lab if you use an undocumented (as far as I know) Admin Switch for the U-AIR wizards. I’ll focus on the SQL U-AIR wizard for the rest of this post, but it is the same for the Exchange and AD wizards as well.

Read the rest of this entry »

VMware engineer Michael White’s post 64 bit is almost here – are you ready? on the Uptime (VMware and Business Continuity) Blog foretells of the future 64 bit requirement of both vCenter and SRM (Site Recovery Manager). White writes:

“I wanted to remind everyone, of what I have already seen floating around the internet, but still important enough to remind.  Our next release of SRM is going to require a 64 bit OS.  This is the same as our next release of VC as it too will require a 64 bit host OS.  This change is required to support the increased capabilities of our products.  As we scale our products to match our customers needs, generally 1 – 2 years in advance of where they will need all the capabilities of a given product we have had to use a 64 bit OS.  This will show itself in increased numbers in things like more simultaneous vSphere client connections.”

To me these new operating system (OS) requirements mean we will see even more instances of vCenter as a VM (virtual machine). It only seems logical that a least path of resistance is to virtualize the management server in order to upgrade, especially considering all have already invested in 64 bit hardware for their hypervisors if they decided to upgrade to vSphere 4 in the first place. To go a step further, I’m willing to argue that it will be more common for an IT Department to justify the cost of additional ESX hosts, even if only dedicated for management, then it will to deploy new servers for physical instances of vCenter.

The looming transition to a console-less ESXi eventually means more management virtual appliances in the future too. Solutions which will continue to need a ESX console or similar will have to substitute their own appliance to operate with ESXi. This means even more justification for additional ESX/ESXi hosts and thus greases the decision to virtualize vCenter as well. I expect to see management clusters of ESX hosts become more common in the future than even the use of management networks today.

ESX hosts have bigger and badder hardware now than ever before allowing for higher consolidation ratios and larger applications to easily run in virtual machines, but it will be interesting to see if the vCenter as a VM best practices change over time. I personally feel that continuing to separate the database from the virtualized vCenter will continue to be a smart choice. Running a separate, and even virtualized, SQL instance ensures not only better performance of vCenter as a VM but enhances DR scenarios. In fact, those that already have the vCenter database on a remote instance will likely have a safer upgrade to the 64 bit vCenter.

The new 64 bit requirements will no doubt make for an interesting migration scenario, and I’m sure we will see some positive and negative opinions. Let me know your thoughts on a 64 bit vCenter as a VM in the future!

VMware made upgrading to vSphere 4 easy enough, but there are still a few things that can go wrong. One example is that admins must consider the patch and version levels of VirtualCenter and ESX  to begin. After the vCenter upgrade specific  compatibilities between vCenter 4 and ESX 3.x must be understood if a mixed mode environment will exist during the span of the upgrade.

vCenter 4 Pre-Upgrade Check

Although the Agent Pre-Upgrade Check Utility was introduced last Fall when VMware released vCenter 4 Update 1, I had not come across a situation where using the tool identified problems with ESX upgrades. Judging by several other blog posts that demonstrated the utility on the web already, most all of these bloggers showed “pass” scenarios as well. For me that was the same result until this week. In fact, the vCenter Pre-Upgrade Check proved it’s worth to me in a huge way.

For those not familiar how to use the Pre-Upgrade Utility, just start the autorun.exe in the vCenter 4 U1 .zip file or from the install DVD. At the bottom of the vCenter Installer menu is the option to start the pre-upgrade check. See the image to the right of this post.

Once the tool starts point it at the VirtualCenter 2.5 server. After less than 5 minutes

Read the rest of this entry »

The vSphere Enterprise Plus vNetwork Distributed Switch (vDS) has been heralded as, and I might add lives up to it’s reputation of, an administrator’s time saver and single point of virtual networking configuration and visibility across many ESX/ESXi 4 hosts. However, the vDS presents some administrative challenges unique from the traditional vNetwork Standard Switch (vSS) that admins are used to. Specifically, since the vCenter 4 Server actually maintains the vDS configuration, some extra design thinking needs to be built into a vSphere 4 environment where a vDS will be used. If vCenter 4 Server itself will be a virtual machine in the environment with a vDS, the design gets even more involved.

There are a few possible problems to consider. In this post I’ll first cover (with the help of a several others) general VM and vCenter vDS networking issues, but along the way I’ll explore thoughts about designing around a vDS for keeping vCenter as a VM.

Read the rest of this entry »

http://kb.vmware.com/kb/1010718 explains the normal way for disabling and removing a VMware ESX/ESXi vNetwork Distributed Switch (vDS or DVS or VDS – LOL), but when I recently tried to do so I received the following error:

“The resource ’1′ is in use. DVS [vDS Name] port 1 is reserved by to entity <not-found.> vnic 4000, type:vmVnic”

The screen shot shows the actual error I received.

After thinking about that message, I decided to check to see if any ports were in fact being used on the vDS. Although PortID 1 dvPortGroups did not show it being used as expected, other PortIDs were, in fact, in use. See image below.

I tried messing around with disabling the ports (blocking was the terminology in the vSphere Client, I believe) but I still could not delete the vDS. It was Saturday and I had family stuff to do so I reluctantly gave up at the time. However, 3 days later I was able to easily remove it via the Remove link on vDS Configuration screen just like I was supposed to be able to do all along. Needless to say I was a bit perplexed.

After researching I discovered that

Read the rest of this entry »

I haven’t always covered all the vCenter, VirtualCenter, and ESX/ESXi updates in the past. Several updates have been released since the last time I did. VirtualCenter 2.5 Update 6’s announcement caught my attention because of a fix to uploading files with the datastore browser. This issue has been reported in one of the longest comment threads here at VM /ETC. More on that later in this post, but I received the following email notification that VMware VirtualCenter 2.5 Update 6 was released:

VMware VirtualCenter 2.5 Update 6 is Generally Available

We are pleased to inform you that VMware VirtualCenter Server 2.5 Update 6 (English and localized) is generally available as of late night January 29, 2010.

VirtualCenter 2.5 Update 6 provides the following improvements:

• Guest Operating System Customization Improvements
• Support for Firefox 3.x Browsers with VirtualCenter Web Access
• Bug and security fixes

For details regarding the new fixes and improvements, please refer to the release notes.

VirtualCenter Server 2.5 Update 6 is available for download.

For details regarding compatibility, please view vSphere Compatibility Matrixes.

Thanks,
VMware Infrastructure Product Management Team

Some of the highlights for me when reading the Release Notes are:

Read the rest of this entry »

VMware has announced an upgrade release of Site Recovery Manager (SRM).  Available today, SRM version 4 not only adds the much anticipated compatibility for vSphere 4 but also provides support for NFS storage, allows multi instance replication between single site pairs, and can be managed in vCenter Linked Mode. More details on the new version follow in the paragraphs below.

VMware customers who currently own SRM with active Sales and Support (SnS) contracts will receive the upgrade at no additional cost. VMware has not changed the per processor licensing model or cost for new customers wishing to purchase.

Some quick links for SRM 4:

• SRM 4. Release notes – http://www.vmware.com/support/srm/srm_releasenotes_4_0.html
• Upgrade KB article – http://kb.vmware.com/kb/1013166
• SRM download – http://downloads.vmware.com/d/ and select Site Recovery Manger
• Michael White’s post SRM 4.0 is here! The wait for vSphere and NFS support is over! on the VMware Uptime Blog covers upgrade strategy options.
• VMware’s documentation for all version of SRM – http://www.vmware.com/support/pubs/srm_pubs.html

vSphere 4.0 Supported

The main requirement to enable the new compatibility and features in SRM is upgrading vCenter to version 4. In fact, Read the rest of this entry »