VM /ETC

Posts Tagged ‘pcoip’

VMware announced the U2 (update 2) release of ESX 4.0, and unfortunately early adopters quickly discovered VMware View virtual desktop connections using the PCoIP protocol were failing. This post provides some quick info on both the new release and the new VDI problem it creates.

UPdate 2 Info

VMware ESX 4 Update 2 is available for download here. The following is a cut and paste of What’s New from the Release Notes:

• Enablement of Fault Tolerance Functionality for Intel Xeon 56xx Series processors— vSphere 4.0 Update 1 supports the Intel Xeon 56xx Series processors without Fault Tolerance. vSphere 4.0 Update 2 enables Fault Tolerance functionality for the Intel Xeon 56xx Series processors.
• Enablement of Fault Tolerance Functionality for Intel i3/i5 Clarkdale Series and Intel Xeon 34xx Clarkdale Series processors— vSphere 4.0 Update 1 supports the Intel i3/i5 Clarkdale Series and Intel Xeon 34xx Clarkdale Series processors without Fault Tolerance. vSphere 4.0 Update 2 enables Fault Tolerance functionality for the Intel i3/i5 Clarkdale Series and Intel Xeon 34xx Clarkdale Series processors.
• Enablement of IOMMU Functionality for AMD Opteron 61xx and 41xx Series processors— vSphere 4.0 Update 1 supports the AMD Opteron 61xx and 41xx Series processors without input/output memory management unit (IOMMU). vSphere 4.0 Update 2 enables IOMMU functionality for the AMD Opteron 61xx and 41xx Series processors.
• Enhancement of the esxtop/resxtop utility— vSphere 4.0 Update 2 includes an enhancement of the performance monitoring utilities, esxtop and resxtop. The esxtop/resxtop utilities now provide visibility into the performance of NFS datastores in that they display the following statistics for NFS datastores: Reads/s, writes/s, MBreads/s, MBwrtn/s, cmds/s, GAVG/s(guest latency).
• Additional Guest Operating System Support— ESX/ESXi 4.0 Update 2 adds support for Ubuntu 10.04. For a complete list of supported guest operating systems with this release, see the VMware Compatibility Guide.
• Resolved Issues – In addition, this release delivers a number of bug fixes that have been documented in the Resolved Issues section.

PCoIP Connections Issue

The following cut and paste is from the VMware KB Article Upgrading VMware Tools in a virtual desktop causes PCoIP connections to fail: Read the rest of this entry »

In contrast to their previously expected bare metal client hypervisor, is VMware now focused on enhancing the VMware View Client Local Mode? I’m basing this assumption on the blog post VMware View: Real BYOC and View Client which was published apparently in response to Citrix’s announcement of the XenClient availability earlier this week at the Synergy 2010 conference.

As I understand Local Mode, VMware View will be able to coordinate the offload of intensive desktops operations such as graphics to the hardware of a user’s notebook, thin client, or PC. Since the VMware View Client is installed as an application on the operating system of the end user’s system, this seems to be a better technical fit with VMware’s expertise in type 2 hypervisor products, or hosted virtualization, such as VMware Workstation, Server, Player, and Fusion. This focus in development also seems more aligned with the Teradici partnership enabling the software based PCoIP protocol.

Combined with the promise of offline synchronization, where changes to the local copy of the VM will be replicated to the master copy in the data center, VMware View Local Mode would definitely make VMware View instantly compatible with the widest selection of hardware possible. This in turn creates the least path of resistance for the VMware VDI solution to provide remote and mobile access to a corporate virtual machine even when users are abroad.

Developing a bare metal client hypervisor has obviously been a bigger than expected challenge for both Citrix and VMware judging by the delays in release experienced by both companies so far. As more and more corporations consider the concept of BYOC (allowing employees to bring your own computer), VMware now seems to be backing out of the hardware platform support arena and falling back to what they do best. Although I believe a smart decision has been made here, there will no doubt be some public “crow to eat” in Palo Alto.

Be sure to read the entire VMware View Blog post linked above, but the rest of this post is the VMware Desktop Team’s own words about View Client Local Mode:

Read the rest of this entry »

As promised a few weeks ago, you can now download the latest version of VMware’s VDI solution, VMware View 4. The download can be found here, and the Release Notes explain What’s New and other helpful information about Getting Started. View 4 is available for trial with a 60 day license – plenty of time to work out the deployment and pilot a group of users. Be sure to upgrade to vSphere 4 Update 1 to take full advantage of View 4.

I thought I’d be a little different and offer a quick overview of View 4′s Features, the new PCoIP protocol, some key deployment requirements, and a high level architecture diagram for those about to implement. I’m pasting information found in the View Architecture Planning Guide and the View Administrator’s Guide, so get a copy of those documents to prepare as completely as possible. Check out all the available literature on the VMware View documentation page.

View 4 Features

It helps to stop and remember what VMware’s VDI can do for the enterprise and not just focus on what’s new from in the latest release. This is more sales than engineering, but the list summarizes the whole package of benefits and shows that the VDI solution covers a lot of desktop and user management concerns:
Read the rest of this entry »

Although VMware announced VMware View 4 earlier this week, the latest release of VMware’s VDI platform will not be available for download until November 19. Described as a “marketing announcement” on the pre release call I attended, this weeks news coincides with the availability of new documentation, videos, and information for those preparing to implement/upgrade as soon as the bits are generally available. This information can be obtained from the new VMware View 4 web site now.

Here is a gallery of View 4 screen shots for those that can’t wait until the 19th. These images were forwarded to bloggers by VMware after last week’s call. A few of the images show the configuration options for choosing the new PCoIP (PC over IP)  protocol when connecting with virtual desktops.
Read the rest of this entry »